AC/DC Current Clamp Transmitter Probe 600A S440266

AC/DC Current Transducer Specifications: DC/AC Current Clamp Adapter Model CA-600 Features : Coverts any DMM to a current clamp Measure current without disconnecting circuit under test AC/DC 600A capability Dual Hall-effect sensors Accuracy DC:±2%+2A AC: ±3%+2A (50~400Hz) For use with any multi-meter at 200mV or 2V ranges for direct readout. Input impedance at least 1MΩ Power on indicating Zero adjustment knob to compensate the hysteresis effect in DC Measurements. Transformer ratio:1000:1 Output 1mV/A Jaw opening capability:30mm conductor Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved. Low battery indication Model : CA 600 This Tecpel AC/DC current clamp in an accessory which will allow your multimeter to measure electrical current up to 600Amperes DC/AC, with a frequency response up to 400MHz. When measuring current with this clamp, There is no need to break a circuit or to affect the isolation. CA600 Specifications : Measurement range: 600A DC or AC Accuracy: ±(2% reading +2A) Frequency Response (AC): 50Hz to 400Hz Input Resistance: 10kHz typical Maximum Conductor Size: 1.1' (30mm) General: Power Requirement: 9V battery Dimensions 7x2.75x1.3(178x70x33mm) Weight: 11 oz. (290g) Accessories: Battery, owners manual